How do I setup my wifi camera by Bluetooth Network Pairing Guide

How do I setup my wifi camera by Bluetooth Network Pairing Guide

Preparation Before Setup

 

1. Download and install the "Littlelf Smart" app on your mobile phone.

2. Ensure the camera supports the desired network frequency and that your phone is connected to the 2.4 GHz network.

3. Power on the camera.

4. Activate your phone's Bluetooth feature.


Bluetooth Network Pairing Steps

 

1. Launch the "Littlelf Smart" app and give it permission to use Bluetooth.

2. Tap the "Add" button in the dialogue box. If not prompted, select the "+" or "Add device" on the homepage. The app will automatically search for the camera; once located, tap the "Add" button to include it.

3. Enter your WiFi password and proceed.

4. Wait for the camera to connect to the network automatically, then tap "Done".

5. You're now all set to use the camera


Warm Tips:

● Make sure your phone's Bluetooth is activated and authorized for the "Littlelf Smart" app, and confirm that the camera supports the specific network frequency and the phone is connected to the 2.4 GHz network. 

● Please enable location permissions on your phone to identify nearby WiFi names related to the camera. If you're hesitant to grant this permission, manually enter the WiFi name and ensure its accuracy.


● During the setup process, keep the phone and the camera within a 1-meter distance and verify the correctness of the WiFi username and password.


● Examine whether the camera's indicator light is in the network setup mode. If unclear about its meaning, click customer service support to see.


● Ensure that all necessary permissions are granted for the app. 


● If, after the above checks, the camera still fails to configure or the indicator light displays an abnormal state (like continuous red/blue-green light, brief flashing before going dark, displaying purple or yellow, etc.), please contact us immediately via customer service support.