Please check if Motion Tracking function has been activated. Also, please note that the camera can only track mitions horizontally but not vertically .
①Enter the live stream page, click the rightmost functions button on the down side.
②Scroll down to find 'Motion Tracking'.
If the camera detects motions but not able to follow the movement horizontally, please go to the Detection settings.
①Click on 'Enter Device' to go to the live feed page.
②Click on '...' the three dots on the top right corner of the live page to enter the settings.
③Scroll down to find 'Detection'
④Please turn off the 'Person Detection' or 'Human Detection', then set the Sensiticity level to high.
⑤Walk by the camera from left to right to see if the camera will be able to follow your movement.
If the issue remians or if you still have questions, please contact customer support for further assistance.
Related Articles
How can I get motion notifications on my mobile device?
When a motion is detected and the device is well set up, you will receive a notification on your phone according to the notification type. If you want to receive notifications, please make sure you have done the following tips: Phone Settings 1. ...
How to set the camera light to turn on when motion is detected?
Please adjust the night vision mode to smart mode. Please refer to the following method: 1, click "Enter Device" on the homepage of the app. 2, click “Function” in the lower right corner; 3, click “night vision mode”; 4, select smart mode.
How to record only when motion is detected?
If you want to record when camera detects the movement, you can use the micro sd card or cloud to record. Our cameras support micro sd cards and the cloud to record video automatically. The SD card storage supports "Event Recording" and "Non-stop ...
How do I turn off the camera?
There are two ways to turn the camera off. 1, You can simply unplug the camera. 2, You can turn on the private mode(means that the sleep mode) of the camera. The following are reference methods: 1, Enter the live video page. 2, Click the "feature" in ...
What if the camera isn't in the network setup mode?
1.Hold the "RESET" button for 5 seconds, until you hear "Reset successfully" or the "Dong-Dong-Dong" sound, indicating the camera has been successfully reset. 2.The camera's indicator light will flash as per the following table: Camera Type Model ...