Where do I find the reset button? How do I do a factory reset to the camera?

Where do I find the reset button? How do I do a factory reset to the camera?


For indoor cameras:
The reset button is on the back of the camera. Press it firmly for 5 seconds to see if you can hear the tone and see the red light flash.
If you hear the tone and the camera light flashes red, you can add it back to the application step by step as you did when you first added the camera.

For outdoor cameras：
Open the rubber cover on the camera and you will find the reset button. You can press and hold the small reset button for about 5 seconds.
After hearing the voice prompt, wait for a moment. When you see the white light flashing, you can connect the camera again.

    • Related Articles

    • How do I physically reset my camera?

      1, Please press and hold the reset button on the back of the camera for 3-5 seconds until you hear the prompt sound and the indicator light flashes, means that the reset is successfully ready to connect to the network. 2, Open the APP and click the ...

    • What should I do if the camera can only rotate vertically but not horizontally?

      What should I do if the camera can only rotate vertically but not horizontally? Please try the below troubleshooting steps. 1.Camera Calibvbration. ①.Enter the live feed page, click the '...' in the upper right corner to go to Settings. ②.Select ...

    • What if the camera isn't in the network setup mode?

      1.Hold the "RESET" button for 5 seconds, until you hear "Reset successfully" or the "Dong-Dong-Dong" sound, indicating the camera has been successfully reset. 2.The camera's indicator light will flash as per the following table: Camera Type Model ...

    • Camera doesn't even have a red flashing light that it's on even though it's plugged in

      ① Could you please power off the camera for 3–5 minutes, then plug it in and reset it? The reset button is on the back of the camera. Press it firmly for 5 seconds to see if you can hear the tone and see the red light flash. ② Still No light even ...

    • What should I do if the camera detects motion but not following them?

      Please check if Motion Tracking function has been activated. Also, please note that the camera can only track mitions horizontally but not vertically . ①Enter the live stream page, click the rightmost functions button on the down side. ②Scroll down ...